Apple Watch Stainless Steel Dressy Band - Classic
€29.99
Classic is the band with a deployment clasp with a timeless design. Made of stainless steel. Compatible with Apple Watch 1-8, SE and ULTRA.
With Classic you are never wrong
The timeless design of Classic is the right choice for any occasion.
Technical features
Classic is made of high precision laser-carved stainless steel. The deployant clasp makes it quick and easy to put on. The high precision lugs allow a quick and strong tightening.
Classic knows how to get noticed
With its classic design and the sheen of steel, once on the wrist it will hardly go unnoticed.
One size fits all
Classic is easy to adjust thanks to the tool that will be supplied with the strap:
1)Use the tool to start extracting the pin, be careful to follow the direction of the arrow;
2)Turn the knob until the head of the pin pops out;
3)Pull out the pin completely using your fingers;
4)Remove or add enough sections to fit your wrist size;
5)Reassemble everything by reinserting the pins in the opposite direction to the arrow paying attention to the direction of the pin;
6)Press the pin against a hard surface until it is completely in place.
How do i choose the right Wrist Circumference?
To identify the size of the case of your Apple Watch look at the writing on its back and locate the part that refers to the dimension in "mm" of the case.
Once you have identified the size of the case of your Apple Watch, select the corresponding value in the "Case Size" section.
Please note that the 38mm, 40mm and 41mm bands are identical to each other, just as the 42mm, 44mm, 45mm and 49mm bands are identical to each other.
Does this band fit my wrist?
Once you have determined the case size of your Apple Watch, as indicated above, to be sure that the band is suitable for your wrist, follow these steps:
1. Measure the circumference of your wrist
Method 1: Measure the circumference of your wrist with a tape measure.
Use a tape measure to measure the circumference of your wrist. Place the tape measure where you will be wearing the strap and make sure the tape fits snugly around your wrist.
Method 2: Measure the circumference of your wrist with a ruler
If you have a ruler, you can use the following to measure your wrist:
- a string or an inextensible thread
- a strip of paper
Place the string or strip of paper where you will be wearing the strap, make sure it fits snugly against your wrist, and mark the overlap with a line.
Place the ruler and string or strip of paper on a flat surface such as a table or piece of furniture. Make sure the twine or strip of paper is flat and tight. Measure the twine or strip of paper from the beginning to the marked point.
2. Consult the following table
Based on the case size of your Apple Watch, make sure that your wrist circumference falls within the corresponding range.
Case Size | Wrist Circumference |
---|---|
38mm | 40mm | 41mm | 14,5cm - 19,5cm |
42mm | 44mm | 45mm | 49mm | 15,0cm - 20,0cm |
Product Reviews / Q&A
-
Reviews (52)
-
Questions & Answers (0)
-
Latest
-
Latest
You might also like
@[email protected]
@[email protected] @[email protected]@[email protected]
@[email protected]