SPECIAL OFFER 3+1 FREE ON ALL PRODUCTS - ADD 4 PRODUCTS TO THE CART TO ACTIVATE - NO CODE NEEDED

SPECIAL OFFER 3+1 FREE ON ALL PRODUCTS

Afrodite

Apple Watch Luxus Edelstahl Glitzer Armband

1) Unscrew the adjustment tool to let the band fits inside it;

2) Insert the tip of the tool into the holes on the side of the strap following the direction of the arrow. Screw the tool in to drive the connecting pins out of the band;

3) Remove or add enough sections according to your wrist size;

4) Reassemble the strap by reinserting the metal pins in the opposite direction to the direction of the arrow. (Attention: The metal pin has a doubler head and a thinner tail, it must be inserted into the hole by entering the thinner tail first);

5) Use the flat side of the tool to push down on the metal pin and slide it until it is flush with the side of the band.

Ambro

Apple Watch Wood Band

1) Unscrew the adjustment tool to let the band fits inside it;

2) Insert the tip of the tool into the holes on the side of the strap following the direction of the arrow. Screw the tool in to drive the connecting pins out of the band;

3) Remove or add enough sections according to your wrist size;

4) Reassemble the strap by reinserting the metal pins in the opposite direction to the direction of the arrow. (Attention: The metal pin has a doubler head and a thinner tail, it must be inserted into the hole by entering the thinner tail first);

5) Use the flat side of the tool to push down on the metal pin and slide it until it is flush with the side of the band.

Apollo

Apple Watch Stainless Steel Jubilee Dressy Band

1) Unscrew the adjustment tool to let the band fits inside it;

2) Insert the tip of the tool into the holes on the side of the strap following the direction of the arrow. Screw the tool in to drive the connecting pins out of the band;

3) Remove or add enough sections according to your wrist size;

4) Reassemble the strap by reinserting the metal pins in the opposite direction to the direction of the arrow. (Attention: The metal pin has a doubler head and a thinner tail, it must be inserted into the hole by entering the thinner tail first);

5) Use the flat side of the tool to push down on the metal pin and slide it until it is flush with the side of the band.

Classic

Apple Watch Stainless Steel Dressy Band

1) Unscrew the adjustment tool to let the band fits inside it;

2) Insert the tip of the tool into the holes on the side of the strap following the direction of the arrow. Screw the tool in to drive the connecting pins out of the band;

3) Remove or add enough sections according to your wrist size;

4) Reassemble the strap by reinserting the metal pins in the opposite direction to the direction of the arrow. (Attention: The metal pin has a doubler head and a thinner tail, it must be inserted into the hole by entering the thinner tail first);

5) Use the flat side of the tool to push down on the metal pin and slide it until it is flush with the side of the band.

Classic Slim

Apple Watch Stainless Steel Thin Dressy Band

1) Unscrew the adjustment tool to let the band fits inside it;

2) Insert the tip of the tool into the holes on the side of the strap following the direction of the arrow. Screw the tool in to drive the connecting pins out of the band;

3) Remove or add enough sections according to your wrist size;

4) Reassemble the strap by reinserting the metal pins in the opposite direction to the direction of the arrow. (Attention: The metal pin has a doubler head and a thinner tail, it must be inserted into the hole by entering the thinner tail first);

5) Use the flat side of the tool to push down on the metal pin and slide it until it is flush with the side of the band.

Devel

Apple Watch Luxury Rugged Stainless Steel Casing + Band Kit

1) Unscrew the adjustment tool to let the band fits inside it;

2) Insert the tip of the tool into the holes on the side of the strap following the direction of the arrow. Screw the tool in to drive the connecting pins out of the band;

3) Remove or add enough sections according to your wrist size;

4) Reassemble the strap by reinserting the metal pins in the opposite direction to the direction of the arrow. (Attention: The metal pin has a doubler head and a thinner tail, it must be inserted into the hole by entering the thinner tail first);

5) Use the flat side of the tool to push down on the metal pin and slide it until it is flush with the side of the band.

1) Insert the Apple Watch case inside the TPU cover;

2) Insert the Apple Watch inside the metal cover by first entering the side with the button and the digital crown;

3) Position the end of the band in the slot on the side of the cover;

4) Insert the metal pin by matching the octagonal head with the octagonal hole;

5) Repeat the process for the other end of the band;

6) Using the screwdriver, screw the screws on the back of the pins you just inserted

Dragon

Apple Watch Stainless Steel Link Bracelet

1) Insert the adjustment tool 1-2mm into the appropriate adjustment holes in order to activate the spring pin;

2) While holding down the spring pin, gently twist the link to remove it;

3) Remove or add enough links according to your wrist size;

4) Reassemble the bracelet by reinserting the spring pin using the adjustment tool to push it into place. Be careful not to scratch the surface of the band;

5) Gently move the links back and forth until you feel the spring pin click into place.

Dragon Ace

Apple Watch Stainless Steel Link Bracelet

Glassy

Apple Watch Cute Trasparent Resin Band

1) Unscrew the adjustment tool to let the band fits inside it;

2) Insert the tip of the tool into the holes on the side of the strap following the direction of the arrow. Screw the tool in to drive the connecting pins out of the band;

3) Remove or add enough sections according to your wrist size;

4) Reassemble the strap by reinserting the metal pins in the opposite direction to the direction of the arrow. (Attention: The metal pin has a doubler head and a thinner tail, it must be inserted into the hole by entering the thinner tail first);

5) Use the flat side of the tool to push down on the metal pin and slide it until it is flush with the side of the band.

Honos

Apple Watch Rugged Steel and Silicon Casing Band + Cover Kit

1) Insert the Apple Watch case inside the TPU case;

2) Insert the Apple Watch inside the metal cover by first entering the side with the button and the digital crown;

3) Insert the two metal pins by matching the octagonal heads with the octagonal holes;

4) Using the screwdriver, screw the screws on the back of the pins you just inserted.

Marble

Apple Watch Cute Resin Band

1) Unscrew the adjustment tool to let the band fits inside it;

2) Insert the tip of the tool into the holes on the side of the strap following the direction of the arrow. Screw the tool in to drive the connecting pins out of the band;

3) Remove or add enough sections according to your wrist size;

4) Reassemble the strap by reinserting the metal pins in the opposite direction to the direction of the arrow. (Attention: The metal pin has a doubler head and a thinner tail, it must be inserted into the hole by entering the thinner tail first);

5) Use the flat side of the tool to push down on the metal pin and slide it until it is flush with the side of the band.

Zeus

Apple Watch Ceramic Link Luxury Bracelet

1) Insert the adjustment tool 1-2mm into the appropriate adjustment holes in order to activate the spring pin;

2) While holding down the spring pin, gently twist the link to remove it;

3) Remove or add enough links according to your wrist size;

4) Reassemble the bracelet by reinserting the spring pin using the adjustment tool to push it into place. Be careful not to scratch the surface of the band;

5) Gently move the links back and forth until you feel the spring pin click into place.

Care and durability instructions by material

Steel

With metal bands, cosmetics, sweat and dust can irritate the skin or oxidize the steel. Avoid exposing the bracelet to chemicals such as chlorine. Regularly clean the band with a little soap and water and then dry it well with a soft cloth.

Leather

Protect your leather band from cosmetics, any type of water, sweat and chemicals and do not expose it excessively to the sun. A leather strap has a lifespan of approximately 6-12 months.

Silicone and nylon

The silicone and nylon straps must be cleaned thoroughly after contact with water (especially salt). Rinse the band with clean water and dry it with a soft cloth. Silicone and nylon straps can cause skin irritation due to the snug fit and perspiration. Therefore, change and clean the band regularly. Do not expose the band to the sun too much, otherwise it may discolour. The silicone and nylon straps have a lifespan of approximately 6-12 months.

Solo Loop straps can expand approximately 5% due to the elastic material.

Wood

Wooden bands should not come into contact with water. A wooden band has a lifespan of approximately 12 months.

Screw connector bands

Check regularly that the screws on the connector are tight. This will prevent the bracelet from detaching from the watch. If necessary, tighten the screws with a Pentalope P2 screwdriver.

WANT

10% OFF?

Subscribe to our newsletter and get 10% off your first order! We will send you the discount code by email.